Soda Bar Dispenser Model CED 500:
Model 500 Standard Performance
Features:
• Available with 2 3, or 4 Post-Mix Dispensing Valves
• 1/4 hp, 17lb Ice Bank, Flooded Manifold
• Occupies a small area of counter space, only 10,3/8" wide. Compare with conventional dispenser
• Insulation-Non-CFC Structural Foam
• Stainless steel cabinet water bath, product lines and drip tray assembly
• Removable refrigeration deck. All installation from front of unit.
• Leg kit included
• 100% Non-CFC, R134A Refrigerant
• Optional Lighted Front Marquee Kit
Specifications:
• Shipping weight: approximately 108 lbs ( 49kg)
• Counter weight with water: approximately 125 lbs (56.7 kg)
• Electrical Ratings: 115 V, 60 Hz, 6.5 A
• Optional 230 V, 50 Hz or 220 V, 60 Hz, 1 phase, 3.3 A
• UL grounded line, cord, and plug
• Compressor: 1/4 hp
• Agitator Motor: 15W
• Condenser Fan Motor: 4 W
• Ice Bank Control: Lancer Electronic Ice Bank Control
• Transformer: 24 VAC Secondary
• Fittings: Stainless steel inlet labeled, 3/8" barb syrup, 3/8" barb soda
• Water bath capacity: 20 gallons
Draw Performance:
• Number of Drinks Below 40F (4.5C)
• 75F(24C) ambient Temperature
• 2-12 oz./min.: 161
• 4-12 oz./min.: 47
• Pull Down Time: 2:35
• Recovery Time: 1:30
• Refrigeration Capacity: When supplied with a 75F(24C) incoming water, 75(24C) syrup and with room temperature at, the unit will dispense 350 twelve ounce drinks at a temperature at 40F(4.5C) or below, drawn at the rate of 2 drinks per minute. Full recovery of the ice bank requires about 2.9 hours. Ice bank weight: 30lbs.

Home Soda Bar Dispenser Model 500:
Model 500 Coca-Cola Standard Performance
Features:
• Available with 2 3, or 4 Post-Mix Dispensing Valves
• 1/4 hp, 17lb Ice Bank, Flooded Manifold
• Occupies a small area of counter space, only 10,3/8" wide. Compare with conventional dispenser
• Insulation-Non-CFC Structural Foam
• Stainless steel cabinet water bath, product lines and drip tray assembly
• Removable refrigeration deck. All installation from front of unit.
• Leg kit included
• 100% Non-CFC, R134A Refrigerant
• Optional Lighted Front Marquee Kit
Specifications:
• Shipping weight: approximately 108 lbs ( 49kg)
• Counter weight with water: approximately 125 lbs (56.7 kg)
• Electrical Ratings: 115 V, 60 Hz, 6.5 A
• Optional 230 V, 50 Hz or 220 V, 60 Hz, 1 phase, 3.3 A
• UL grounded line, cord, and plug
• Compressor: 1/4 hp
• Agitator Motor: 15W
• Condenser Fan Motor: 4 W
• Ice Bank Control: Lancer Electronic Ice Bank Control
• Transformer: 24 VAC Secondary
• Fittings: Stainless steel inlet labeled, 3/8" barb syrup, 3/8" barb soda
• Water bath capacity: 20 gallons
Draw Performance:
• Number of Drinks Below 40F (4.5C)
• 75F(24C) ambient Temperature
• 2-12 oz./min.: 161
• 4-12 oz./min.: 47
• Pull Down Time: 2:35
• Recovery Time: 1:30
• Refrigeration Capacity: When supplied with a 75F(24C) incoming water, 75(24C) syrup and with room temperature at, the unit will dispense 350 twelve ounce drinks at a temperature at 40F(4.5C) or below, drawn at the rate of 2 drinks per minute. Full recovery of the ice bank requires about 2.9 hours. Ice bank weight: 30lbs.

Home Soda Bar Dispenser Model CED 1500:
Model CED 1500 Standard Performance
Features:
• Standard-Capacity-1/3 hp, 30 lbs Ice Bank, Flooded Standard Performance manifold
• Stainless Steel Cabinet, Water bath, Product Lines and Splash Plate; removable Refrigeration Deck
• Insulation 100% Non-CFC-Structural Foam
• Flex Manifold Configuration for Multiple Non-Carbonated Drinks
• Available with 5 or 6 Post-Mix Dispensing Valves
• 100% Non-CFC, R134A Refrigerant
• Optional Lighted Marquee Kit and Leg Kit
Specifications:
• Shipping weight: approximately 150 lbs ( 68.04 kg)
• Counter weight with water: approximately 220 lbs ( 99.79 kg)
• Electrical Ratings: 115 V, 60 Hz, 6.5 A
• Optional 230 V, 50 Hz, 1 phase, 4.4 A
• UL grounded line, cord, and plug
• Compressor: 1/3 hp
• Agitator Motor: 25 W
• Ice Bank Control: Ranco 018-113-00, Pre-set
• Transformer: 24 VAC Secondary
• Fittings: Stainless steel inlet labeled, 1/4" barb syrup, 3/8" barb soda
• Valves available: LEV standard
• PN 85-1595A-100 5 LEV (Manifold configuration:3, 2 flex with 4 and 5 optional water options)
• PN 85-1596A-100 6LEV(Manifold configuration:3, 3flex with 4,5 and 6optional water options)
Draw Performance:
• Number of Drinks Below 40F (4.5C)
• 75F(24C) ambient Temperature
• 2-12 oz./min.: 350
• 4-12 oz./min.: 190
• 90F(32C) ambient Temperature
• 2-12 oz./min.: 180
• 4-12 oz./min.: 90
Refrigeration Capacity: When supplied with a 75F(24C) incoming water, 75(24C) syrup and with room temperature at, the unit will dispense 350 twelve ounce drinks at a temperature at 40F(4.5C) or below, drawn at the rate of 2 drinks per minute. Full recovery of the ice bank requires about 2.9 hours. Ice bank weight: 30lbs.

Home Soda Bar Dispenser Model 1500:
Model 1500 Coca-Cola Standard Performance
Features:
• Standard-Capacity-1/3 hp, 30 lbs Ice Bank, Flooded Standard Performance manifold
• Stainless Steel Cabinet, Water bath, Product Lines and Splash Plate; removable Refrigeration Deck
• Insulation 100% Non-CFC-Structural Foam
• Flex Manifold Configuration for Multiple Non-Carbonated Drinks
• Available with 5 or 6 Post-Mix Dispensing Valves
• 100% Non-CFC, R134A Refrigerant
• Optional Lighted Marquee Kit and Leg Kit
Specifications:
• Shipping weight: approximately 150 lbs ( 68.04 kg)
• Counter weight with water: approximately 220 lbs ( 99.79 kg)
• Electrical Ratings: 115 V, 60 Hz, 6.5 A
• Optional 230 V, 50 Hz, 1 phase, 4.4 A
• UL grounded line, cord, and plug
• Compressor: 1/3 hp
• Agitator Motor: 25 W
• Ice Bank Control: Ranco 018-113-00, Pre-set
• Transformer: 24 VAC Secondary
• Fittings: Stainless steel inlet labeled, 1/4" barb syrup, 3/8" barb soda
• Valves available: LEV standard
• PN 85-1595A-100 5 LEV (Manifold configuration:3, 2 flex with 4 and 5 optional water options)
• PN 85-1596A-100 6LEV(Manifold configuration:3, 3flex with 4,5 and 6optional water options)
Draw Performance:
• Number of Drinks Below 40F (4.5C)
• 75F(24C) ambient Temperature
• 2-12 oz./min.: 350
• 4-12 oz./min.: 190
• 90F(32C) ambient Temperature
• 2-12 oz./min.: 180
• 4-12 oz./min.: 90
• Refrigeration Capacity: When supplied with a 75F(24C) incoming water, 75(24C) syrup and with room temperature at, the unit will dispense 350 twelve ounce drinks at a temperature at 40F(4.5C) or below, drawn at the rate of 2 drinks per minute. Full recovery of the ice bank requires about 2.9 hours. Ice bank weight: 30lbs.

Home Soda Bar Dispenser Model CED 2500:
Model CED 2500 High Performance
Features:
• High Performance 3/4 hp, 55lbs Ice Bank, Flooded High Performance manifold
• Stainless Steel Cabinet, Water bath, Product Lines and Splash Plate; removable Refrigeration Deck
• Insulation 100% Non-CFC-Structural Foam
• Flex Manifold Configuration for Multiple Non-Carbonated Drinks
• Available with 6 or 8Post-Mix Dispensing Valves
• 100% Non-CFC, R134A Refrigerant
• Optional Lighted Marquee Kit and Leg Kit
Specifications:
• Shipping weight: approximately 300 lbs ( 136.1 kg)
• Counter weight with water: approximately 387 lbs ( 175.5 kg)
• Electrical Ratings: 115 V, 60 Hz, 6.5 A
• Optional 230 V, 50 Hz, 240 V, 60 Hz,1 phase, 7.5 A
• UL grounded line, cord, and plug
• Compressor: 3/4 hp
• Agitator Motor: 25 W
• Ice Bank Control: Lancer Electric Ice Bank Control
• Transformer: Basler 24 VAC Secondary
• Fittings: Stainless steel inlet labeled, 3/8" barb syrup, 3/8" barb soda
• Water Bath Capacity: 20.9 gallons
• Valves available: LEV standard
• PN 85-1595A-100 6 LEV (Manifold configuration:3, 2, 1 with plain water option on valves 3, 4, and 5)
• PN 85-1596A-100 8 LEV (Manifold configuration:3, 1, 1, 3 and plain water option on valve 4 and 5)
Draw Performance:
• Number of Drinks Below 40F (4.5C)
• 75F(24C) ambient Temperature
• 2-12 oz./min.: Indefinite
• 4-12 oz./min.: 538
• 90F(32C) ambient Temperature
• 2-12 oz./min.: 308
• 4-12 oz./min.: 156
• Refrigeration Capacity: When supplied with a 75F(24C) incoming water, 75(24C) syrup and with room temperature at, the unit will dispense 350 twelve ounce drinks at a temperature at 40F(4.5C) or below, drawn at the rate of 2 drinks per minute. Full recovery of the ice bank requires about 2.9 hours. Ice bank weight: 30lbs.

Home Soda Bar Dispenser Model 2500:
Model 2500 Coca-Cola High Performance
Features:
• High Performance 3/4 hp, 55lbs Ice Bank, Flooded High Performance manifold
• Stainless Steel Cabinet, Water bath, Product Lines and Splash Plate; removable Refrigeration Deck
• Insulation 100% Non-CFC-Structural Foam
• Flex Manifold Configuration for Multiple Non-Carbonated Drinks
• Available with 6 or 8Post-Mix Dispensing Valves
• 100% Non-CFC, R134A Refrigerant
• Optional Lighted Marquee Kit and Leg Kit
Specifications:
• Shipping weight: approximately 300 lbs ( 136.1 kg)
• Counter weight with water: approximately 387 lbs ( 175.5 kg)
• Electrical Ratings: 115 V, 60 Hz, 6.5 A
• Optional 230 V, 50 Hz, 240 V, 60 Hz,1 phase, 7.5 A
• UL grounded line, cord, and plug
• Compressor: 3/4 hp
• Agitator Motor: 25 W
• Ice Bank Control: Lancer Electric Ice Bank Control
• Transformer: Basler 24 VAC Secondary
• Fittings: Stainless steel inlet labeled, 3/8" barb syrup, 3/8" barb soda
• Water Bath Capacity: 20.9 gallons
• Valves available: LEV standard
• PN 85-1595A-100 6 LEV (Manifold configuration:3, 2, 1 with plain water option on valves 3, 4, and 5)
• PN 85-1596A-100 8 LEV (Manifold configuration:3, 1, 1, 3 and plain water option on valve 4 and 5)
Draw Performance:
• Number of Drinks Below 40F (4.5C)
• 75F(24C) ambient Temperature
• 2-12 oz./min.: Indefinite
• 4-12 oz./min.: 538
• 90F(32C) ambient Temperature
• 2-12 oz./min.: 308
• 4-12 oz./min.: 156
• Refrigeration Capacity: When supplied with a 75F(24C) incoming water, 75(24C) syrup and with room temperature at, the unit will dispense 350 twelve ounce drinks at a temperature at 40F(4.5C) or below, drawn at the rate of 2 drinks per minute. Full recovery of the ice bank requires about 2.9 hours. Ice bank weight: 30lbs.

Features included:

• Countertop Dispenser.
• Carbonator.
• Syrup pumps and supply lines.
• Co2 and syrup regulator.
• One Catalina 5 lb. Co2 tank.
• Quick connect for Pepsi and Coke products.
• Installation kit, brix cup and syrup separator.

Extra Components:

• Co2 Tanks (Back-up tanks for a continuous supply of soda.)
• Water Connection Kit (For connecting the soda dispenser to your household water supply.)
• Water Filter System (For your best tasting soda product.)
• Bag-In-Box Syrups

The extra components can be purchased on the products page under the listing Beverage System Components.

DBEC LLC
3700 East Elm Road
Oak Creek, Wisconsin 53154-6618
Phone 414-255-4432
Email: customerservice@dbec.us